• Folds small and is lightweight for easy mobility • Holds bikes by rear axle with soft rubber-dipped fingers • Fits variety bikes with 20" – 29" tires, and is compatible with most disc brakes.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
The Saris Mighty Mite is a lightweight, solid bike-parking rack for indoor, outdoor, and residential use. Built with a rugged, weatherproof steel frame, the Mighty Mite holds up to six bikes within its compact footprint.
Transport all types of bikes with Saris’ Freedom 4-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright supports. It uses quick-adjust trays and ratcheting straps to secure four bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright supports even tilt down to allow trunk access.
What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
With its robust construction, eye-catching style and compact design that carries both bikes on a single bar, the SuperClamp is your bike’s new BFF. This lightweight – yet mighty – platform hitch rack is ready to hit the road at a moment’s notice. Whether you’re hauling eBikes, beefy mountain bikes, your prized TT rig, or an assortment of bicycles, the SuperClamp’s dual shepherd’s hooks promise all bikes a truly secure ride without touching the bike’s frame. And thanks to the SuperClamp’s tilting feature, no more unloading bikes to let the dog out of the back. Simply tilt down and release the hounds. Top it all off with integrated locks, a built-in bottle opener and head-turning reflectors, the SuperClamp 2-bike is proof that you can have your cake and eat it too. - Fastest loading bike rack around thanks to the dual wheel-clamping hooks (bonus: no frame contact). - Lightweight, yet mighty! Weighs only 35 lb, and is rugged enough to carry 2 bikes, up to 60 lb each. - Features integrated locks and reflectors for extra security and visibility, day and night. - Open Sesame! Tilting feature allows hatch access, even when fully loaded, and folds up when not in use. - Sleek and compact design holds 2 bikes on a single bar.
Meet the SUPERBones. It is the classic Bones 3-bike trunk rack, reimagined. Saris took everything they've experienced, observed and learned from their Bones customers and used it to guide their design process. Out of that work was born a trunk rack more secure, more beautiful and more intuitive. With interwoven steel straps that store neatly within the rack to the floating foot that pivots to conform to a wide variety of trunk shapes, the SUPERBones is truly a functional piece of art with all the features of a forward-thinking bike rack. - Carries 3 bikes (35 lbs/bike) - Anti-sway adjusts in and out to maximize bike protection - Bikes are easy to load thanks to pivoting anti-sway straps. - Integrated locking to secure bike to rack and rack to car - Heavy duty straps reinforced with internal steel strands - Strap adjustment lever quickly tightens rack to car - Internal ratcheting mechanism creates the best-in-class strap management - Adjustable foot for maximum protection of car by intuitively adjusting to vehicle’s trunk, bumper shape and design - Stationary outer leg creates an easy install on vehicle - Frame fits over most spoilers - Rust-free, injection molded plastic - Compatible with most vehicles (consult the Saris Fit Guide for approved fits) - Lightweight at 18.5 lbs
If you’re looking for a car rack that will haul your favorite 2-wheeled possessions with swagger and security, the Bones Hitch 3-bike has you covered. With arching lines and robust, American-made materials this hitch rack can be summarized in two words: beautiful simplicity. Weighing in at only 16 pounds, this 3-bike hitch rack is a full 25% lighter than similar racks—et just as strong. With integrated anti-sways and hold downs, the Bones Hitch is a fully functional piece of art. - Carries 3 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 16 pounds. - Made in Madison, WI.
Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.
- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-ubcg hitches out of the box. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 15 pounds. - Made in Madison, WI.
Garage floor space is precious. Saris’ CycleGlide offers an ingenious and elegant space-saving solution. You can store up to four bikes of virtually any size and shape thanks to its adjustable hooks. The gliding rails maximize storage room and allow easy access when you want to take a bike down to ride.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
The Bones Hitch 4-Bike rack is born out of the design and function of Saris' best-selling Bones rack and brought to life in the form of a hitch rack. You wanted a nicely designed, tilting rack at a great value, and you wanted it to be lightweight. The result is the Bones Hitch. The Bones Hitch is one of the lightest racks in the marketplace yet every bit as strong and durable. That's why Saris backs it—along with all of their racks—with a lifetime warranty. Stylish, lightweight, easy to use and made here in the USA—who says you can't have it all? - Carries 4 bikes, up to 35 pounds each. - Preassembled in box. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches out of the box. - Lifetime warranty. - Made in Madison, WI. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 20 lbs.
Saris’ Sentinel 3-Bike rack is ready to go right out of the box, easy to mount, and, thanks to its narrow arm spread, securely holds three bikes. The frame adjusts to the contours of your car and folds down flat for simple storage. To protect your car and provide a solid mount, the six hold-down straps have coated hooks, while the legs are foam-padded. Stiff ratcheting straps ensure a firm grasp on your bikes.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Make the most of your space with Saris' Bike Bunk. It stores two bikes and adjusts to fit different bike styles and sizes. This free-standing mount features grippy, cushioned contact points that protect your floor and wall.
Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.
$12.99 - $13.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Keep your garage organized or maximize your living space with Saris’ Bike Trac. A wide wheel track accepts most front and rear bike wheels, plus it's long enough to keep your bike securely in place and your walls protected. Mounting hardware is included.
You’re cruising down the road with your collection of bikes and make a pit stop to top off the tank. While at the gas station you want to grab a snack from the back cooler and let Rover out for a well…you know. You walk around to the back of your vehicle and realize that you need to unload all these bikes to get access to the hatch. Sorry, Rover. You’re out of luck. Now what if we told you there was a better way? An easier way. A hitch bike rack that lets you access the rear of the car in one step – both with bikes and without. Born in Saris' innovative labs in Madison, Wisconsin, the Glide EX does exactly this thanks to one-step glide action. Simply push the trigger to release the rack, and boom – hatch access. When you’re done, the same amount of (non) effort glides the hitch rack upright. Then you’re good to go, and Rover is too. Featuring easy-to-load bike hold downs, best-in-class ratchet straps and integrated locks, you can speedily fasten your bikes to the Glide EX and know they’re secure as you head toward your next adventure. - Convenient, one-step access to the back of the car - fully loaded with bikes or not. - Innovative four-bar linkage system controls the center of mass, creating a smooth, glide-action away from the vehicle. - Hanging hitch bike rack transports as many as 4 bikes, up to 35 lb. per bike. - Complete integrated security: locks the rack to the car and the bikes to the rack. - Style points: your choice of standard black, head-turning bronze and sapphire blue. - Hanging hitch style bike rack - Carries 4 bikes, up to 35 lb. each. - One-button glide action provides instant access to rear of vehicle, both with bikes loaded and without. - Innovative four-bar linkage system: centers bike mass for smooth, glide-action away from vehicle. - No assembly needed - Rack weight: 37 lb - Bike hold downs are easy to use and quick to load. - Best-in-class ratchet straps speedily fasten bike to the rack. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Built and tested to outlive the elements.
Add Saris' Freedom Long Wheelbase Bar to your Saris Freedom rack (sold separately) to carry an extra long wheelbase bicycle like a tandem or recumbent. The rack holds two bikes of up to 35 pounds each, and the Long Wheelbase Bar holds a bike that measures up to 57 inches axle to axle.
Transport all types of bikes with Saris' Freedom Spare Tire 2-bike rack. Designed to fit all spare tires (left-, right-, or center-positioned), this innovative rack adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each. Loading is made easy by the low tray height. The center upright support even tilts down to stay out of the way when not in use.
Transport all types of bikes with Saris’ Freedom 2-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright support even tilts down to allow trunk access. Plus, the rack itself only weighs 21 pounds, making it easy to take on and off.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
Choose your own adventure with the MTR 1-bike hitch rack. Whether you’re feeling me-time or party time, the MTR can adjust for any occasion. The secret is in the MTR’s modular design (after all, MTR stands for “Modular Tray Rack”). Simply add or remove trays to securely haul between one and three bikes to wherever the trail may lead. When you’re ready to hit the road, feel free to take the scenic route. Rugged enough to handle the harshest of environments, the MTR is built with American-made steel and aluminum. Complete with versatile and sleek nesting trays with dual-arm wheel holders, the MTR can carry nearly any rig – from Junior’s MTB to downhill to your favorite eBike – securely, in style and without ever coming into contact with your bike’s frame. The Saris MTR also available in a 2-Bike version. Product Features - Modular: carries 1 bike, up to 60 lbs, and can be customized with Add-On to transport up to three bikes. - Pivot Away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes and never touch the bike's frame. - Full Tilt: tilting feature allows easy hatch access without removing bikes. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Tray-style hitch bike rack. - Carries 1 bike, up to 60 lb. - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed. - Tool-free installation. - Rack weight: 35 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Easily folds up when not in use. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Accommodates wheel bases up to 53 inches. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Constructed from American-made aluminum and steel, and tested to outlive the elements.
Whether you’ve invited more friends for an epic ride or can’t decide which rig to take to the trails, the MTR 1-Bike Add-On has you covered. Compatible with both the MTR 1-bike and 2-bike hitch rack, these add-on trays save you the hassle of buying a new rack to haul more bikes. Built with the same robust materials as the MTR rack, these add-on trays are ready to roll out of the box and are the soul of the Modular Tray Rack (MTR) functionality. Product Features - Bike tray add-on for MTR 1-bike or 2-bike tray-style hitch rack. - Built with American-made aluminum and steel. - Nesting wheel trays speed up bike loading and unloading process. - Wheel trays and dual-arm wheel holders securely transport variety of bikes. - Hauls bikes up to 60 lb if used as first two trays closest to vehicle; or up to 35 lb if used as third or fourth tray. - Bike tray add-on for the MTR platform hitch rack. Compatible with both the 1-bike and 2-bike base. - Carries 1 bike, up to 60 lb when used in the first two positions closest to the vehicle. When used in positions furthest from the vehicle, tray can hold a bike up to 35 lb. - Minimal assembly required. - Rack weight: 30 lb. - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Integrated locking cable secures bikes to the rack. - Hitch compatibility will depend on MTR base unit. - Built and tested to outlive the elements.
Reliable. Durable. Quieter Than Ever Before. When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train. The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified. Specs - Noise level: 59 decibels at 20 mph - Power measurement accuracy: +/- 2% - Maximum power output: 2000 watts at 20 mph - Simulates a 20% climbing grade - Fast response electromagnetic resistance - Measures speed, cadence and power – no external sensors needed - 20 lb precision balanced flywheel - Integrated dual ANT+ FE-C and Bluetooth FTMS standards - Built-in front wheel block - Integrated carrying handle - Compatible with Shimano 8-11 speed cassettes - XD/XDR freehubs sold separately (link) - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link). - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page) - Maximum weight (rider and bike): 300 lbs. - Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm). - Weight: 47 lb. (21.3 kg). - Cassette sold separately.
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
Page 1 of 2 Next page