Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Please call 515-964-5623 to check on price and availability or visit us in-store to see our full selection.

$995.99
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)
$1,799.99
Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty
$2,199.99
Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty
$6.99
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
$39.99
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards
$25.99
Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.
$42.99
When your idea of "a ride around town" involves 180s down stairs, reverse manuals on planter boxes, and landing sick gaps backward, even your sweet WeThePeople Helix Freecoaster is going to eventually wear out. Keep that freecoaster free with this replacement Helix driver and get back to tearing it up on the street or in the park.
$108.95 - $108.99
WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we've ever made. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area
$11.50 - $48.00
We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels
$10.99
- Replacement rear skewer - Spacing: 135mm - Material: Steel
$308.99
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps
$12.99 - $24.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
$19.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
$69.99 - $110.99
Sta-Tru Double Wall Rear Wheels - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 622 / road / 29" - Valve: Schrader - Tire Type: Clincher
$77.99
Sta-Tru Wheels TR21V tubeless-ready double-wall rims - Hybrid rim with an attractive rim profile developed for Sta-TruWheels, Inc - KT ATB 9mm/100/108 axle hub - Silver UCP spokes
$104.99
- Sta-Tru Wheels ST725 silver anodized alloy single wall rims w/ 36holes - Attractive 21mm tall aero profile, and includes a nice 10.5mmbraketrack with wear indicator - Road style KT alloy road hub adds value - 36 UCP spokes
$22.99
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
$25.00 - $29.00
Switching to tubeless or in need of valve replacements? Serfas Tire RX replacement valves will do the trick. Available sizes of 32mm, 44mm, or 60mm valves with removable cores, extra valve core, and Schrader to Presta adapter with core removal tool. Please note, Due to the multi-step chemical process and variables involved in anodizing, colors may vary slightly between batches produced.
$91.99
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
$1,349.99
Elevating Weekend Hot Laps to World Cup XC Status From weekend hot laps to World Cup XC finals, the Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs. An unmatched level of durability, precision, and performance in this new Carbon Control wheelset that is purpose-built to open terrain, from gut-wrenching climbs to tear-inducing descents – a whole new era of riding. A high-performance wheel that excels everywhere from world cup xc races to your favorite weekend trail. The Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs and spokes. This level of quality, precision and performance has previously been found only on wheels costing twice as much. - Rim: Control SL 29, 29mm Internal Width, Zero Bead Hook 4mm FlatTop Design, Tubeless Compatible, Compatible with Tire Inserts - Spoke Pattern: 28-Hole Two-cross (1:1) Non Driveside Front and 28-Hole Two-cross (1:1) Rear - Spoke Type: DT Competition Race Straighpull—Front Driveside 301mm, Non-Driveside 300mm , Rear Driveside 298mm, Non-Driveside 301mm - Nipple Type: DT Swiss Hexagonal Prolock Alloy - Hub: DT Swiss 350 Straight-pull, 6-bolt, 36t Star Ratchet System, 110x15mm & 148x12mm thru-axle compatible - Weight: Set—1450g w/ Tubeless Rim Tape - Assembly Method: Hand-built - Extras: 19 and 31mm OD end cap options included, Roval Spoke Kit, Tubeless Rim Tape and Valves, Lifetime warranty - System Weight Limit: 275lbs/125kg
$1,099.99
Performance Upgrade Made Easy The C38 brings carbon fiber high performance to the real world. It's a versatile all-rounder equally at home crushing gravel washboards and summiting alpine passes. Optimized for use with modern wide tires, providing the right amount of sidewall support to facilitate surefooted handling in all conditions, the C38 wheelset is a great handling, lively climbing, robust all-road performer that also aerodynamically outperforms many deeper, aero-specific rims that cost twice as much. Carbon wheels are a true performance upgrade to any bike, but too often the price tag puts them out of reach. The Rapide C38 shatters that barrier and brings a class-leading Roval carbon rim and DT Swiss reliability together to provide riders with the best performance carbon wheel per dollar.
$724.99
The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road. - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,590g, Front 725g, Rear 865g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - System Weight Limit: 275lbs /125kg.
$1,024.99
The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road. - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi). - Weight: Rear 865g (including 15g, tubeless rim tape and tubeless valve). - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - System Weight Limit: 275lbs / 125kg
$1,174.99
Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals. - Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width - Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
$1,624.99
Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals. - Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width - Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg
$999.99
Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back. - Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve) - Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg
$1,749.99
Following directly in the tire tracks of the Terra CLX, the new Terra CL utilizes the same super-light, incredibly tough rim as our flagship wheel. It's a hook-bead, 33mm deep carbon fiber rim with a 25mm inner width that plays well with tubeless setup and allows you to mount tires anywhere from 28mm to 47mm wide at whatever pressure you feel like running. In a nod to accessibility, durability and real-world serviceability, we opted to use ultra-dependable DT Swiss 350 hubs and lace them to the rims with DT Swiss Competition Straightpull spokes. The net effect of these changes is a wheelset that is almost as light as our incredibly light Terra CLX, offering close to the same benchmark performance but with more easily sourced spokes in the event of some back-of-beyond carnage, all with a price tag that is about half that of our flagship product. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 350 Straight-pull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Two-cross (1:1) 24 count, R: 287mm, L: 286mm; Rear: Two-cross (1:1) 24 count, DS: 284mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,408g, Front 654g, Rear 754g (including tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg
$649.99
Designed to handle everything from backcountry rock gardens to heavy days at the bike park, the Traverse is the definitive all-mountain wheel. A super-light, super-tough alloy rim is combined with refined and ultra-dependable hub and spoke technology for a wheel that can conquer any mountain. - Rim Type: Traverse Alloy, 29, Disc Brake, Tubeless Ready, Zero Bead Hook Design - Rim Details: 22mm Depth, 34mm External Width, 30mm Internal Width - Hub: Roval Step Flange Hub (SP19151/JFM02R) 6-Bolt, DT Swiss Ratchet LN 18t (20 deg), 110x15mm & 148x12mm thru-axle, SRAM XD Freebub, (Convertible freehub and endcaps) - Bearing Type: Sealed Steel Cartridge Bearing - Spokes: DT Swiss Competition Race J-Bend, Front: Two-Cross 28 count, L: DS 283mm, R: 283mm; Rear: Two-cross 28 count, L: DS 283mm NDS 283mm - Nipple: DT Swiss Hex Prolock Brass 2.0x14mm - Tire Size: 1.95" – 3.0"; Max Pressure: 40 psi - Weight: Wheelset 1,870g (including tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; to the last nipple turn - Extras: 19 and 31mm OD end cap options included, Roval tubeless tape and tubeless valve, Spare Spoke and Nipple Kit - System Weight Limit: 240lbs / 109kg
$41.99 - $42.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
$57.99 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Page 1 of 24 Next page